Electric Radiant Ceiling Heat
Electric radiant ceiling heat is an aesthetically pleasing heat generator. Is there a way to somewhat replicate that feeling of getting warmth coming from the sun, and for this case the warming happens inside a room? For others this may seem like a scene out of a high-end and high tech house, but in reality even ordinary households can ‘replicate’ that warmth and that can be done through electric radiant ceiling heat.
This is the heat that is disseminated inside the room coming from the ceiling down. And the promoter is a system known for the absence of moving parts, takes minimal space in the ceiling and known not to produce drafts. The radiant heat produced doesn’t blow off the heat in just one single direction; rather the heat or the warmth is distributed evenly. Also the radiant heat produced and maintained inside the room does not affect the usual day-to-day activities since the delivery of the warm air is done silently and with greater efficiency.
Learn How the Electric Radiant Ceiling Heat is Produced
The warm air dissemination is made possible by radiant heat transfer. By this, it means that the members of the households are warmed directly just the way people are warmed by the heat of the sun during the day. There are two specific roles that are played by the system. One, the system can be used to provide supplementary heating inside the home. Or two, the household can decide that this ‘heater’ can serve as the primary source of heating inside the home in most homes, the system is primarily used instead of the traditional fireplaces and this is often used during the winter.
Reviewing How the Electric Radiant Heat System Works
Almost all systems that produce radiant heating for office and home applications share almost similar components and construction. Most of these systems do feature high-density fiber glass insulation board, heating element and there is a textured surface that is usually mounted in the frame. In terms of size, most of the panels used are 1-inch in thickness and these panels are backed by 120 or the 240 V.
When installing the panels or the systems, even the DIY-type of consumer can take pride in the installation process. Most of the ceiling panels for use in the generation of heat can come as pre-assembled. The panels are then fastened mechanical on the ceiling. The standard wiring techniques should be done, including for the electrical and thermostat connections.
The Advantages of the Electric Radiant Ceiling Heat
In general, this works by warming the objects directly. You can expect that a much lower air temperature is produced instead of the usual forced air systems since the system focuses on the occupants and not on the air inside. One advantage of the electric radiant ceiling heat is that this can easily change the feeling and the environment inside the room. The panels can heat easily, and can easily cool the moment the system is turned off. In short, these panels deliver convenience to consumers.
For someone wanting to create different ‘zones’ within the office or the house and each zones with different temperatures, then they can make that happen with these panels thanks to the use of the thermostat for each area. This kind of set-up allows for better savings which is another advantage of the paneling. Savings is realized since consumers can only warm up one ‘zone’ as necessary.
• As mentioned, the panels are easy to install and can be used as an architectural feature.
• The location of the panels will depend on your creativity- can be installed on the surface or can be suspended on the ceiling.
• There is no need for filters, ducts and flues.
• Because you can ‘zone’ areas within the house with the use of the thermostat, then you can easily cut on the heating and energy expenses.
• Another advantage is that these ceiling panels are best for retrofit applications.
• You can also expect that the operations of the panels will be noise-free since the panels don’t make use of moving parts like fans.
• And compared with the usual forced-air heating system, these panels are easy to install and the cost of installation per square foot is way cheaper than the usual forced air heating systems.
The only disadvantage that can be seen in having these panels is that the initial cost of the panels and its installation can be quite expensive. But in terms of maintaining the panels, you should not worry about it. In terms of cost, the typical cost per panel usually starts at $200 and may fetch up to $500. And for every zone made inside the property, you may need a thermostat that can cost an average of $40 each.
Though this is loaded with benefits and advantages, remember that the electric radiant ceiling heat system has its own share of disadvantages. Because the warm air comes from above, many homeowners tend to complain about heads that are being too warm. Others have noted that the fluctuating room temperatures can be uncomfortable at times.
Is This System the Right Fit for Your Radiant Heat Needs?
But these ‘small’ and minimal complaints about the electric radiant ceiling heat are overshadowed by its many benefits that can be realized inside the household. Just to wrap up, you can expect that this system can offer a room-by-room control of the temperature, even heating, no vents, aesthetical locations, energy efficient and easy to install. All these basics about the benefits of the radiant heating has been put forward by Radiantheatreviewer, and hopefully you can use all these in deciding if you will add this system in your household. But if you use the convenience and the comfort offered by the radiant heat, then there’s no question about it; installing this heater is one big decision that you can make.
- The Different Radiant Heating Systems
- Radiant Wall Heater
- Electric Radiant Floor Heat
- More Information on Ceiling Radiant Heaters
Return from Electric Radiant Ceiling Heat to the Radiant Heat Reviewer Homepage.